240/42V Dual Voltage LED Traffic Signal

Traffic Technologies Ltd > Product Brochures > Traffic Signals & Hardware > 240/42V Dual Voltage LED Traffic Signal

ELV – DUAL VOLTAGE TRAFFIC LANTERNS

240V/42V LED Traffic Signal Lanterns

A high quality 240/42V AC operated / IP65 Rated LED signal lantern.

42V AC is rated ELV, and traffic operators and on-site installers avoid the risk of electrical contact. As most of the intersections operate on 240V AC Aldridge has developed a 240/42V AC Dual-Voltage LED traffic lantern to make the transition progressive.

Power Performance

Aldridge LED signal consumes less power than a conventional halogen lamp, allowing a massive reduction of 89% in operating cost.

Optical Performance

The Aldridge LED signal ensures uniform luminous distribution. Each aspect presents a pattern of light points that are uniformly distributed across the circular aperture, which results in a constant light source without variation when viewed from any angle within the viewing range.

Lamp Monitoring

Aldridge LED signals have integrated lamp failure monitoring to the requirements of AS-2144. If 20% LEDs fail in any aspect of signal or Luminous Intensity drops less than 80%, the aspect will shut down automatically.

Low Output Degradation

Aldridge LED signals are driven at a very low current. Hence have very low output degradation over a long period of time.

Light Output Dimming

Aldridge LED lanterns can achieve light dimming by controlling input voltage magnitude or phase. The signals have linear dimming characteristics.

  •  Selectable voltage between 240V & 42V AC
  •  Available in Aluminium, Polycarbonate and Recyclable Go Green Enviro Housing
  •  Dual stage connection for simple installation
  •  Fused 42V AC input for overvoltage protection
  •  Wide temperature tolerance –from -15ºC ~ +60ºC
  •  Lamp failure monitoring and shutdown system
  •  Linear dimming on both 240V and 42V operation
  •  Uniform luminous intensity
  •  Low sun phantom
  •  IP65 rated enclosure – Dust and moisture resistant
  •  Designed for AS-2144
  •  Retrofit optics available
  •  Safety Consideration
  •  Substantial energy and cost-saving
  •  Long reliable service life
  •  Low maintenance
  •  Uniform light illumination
  •  Enhanced dust and moisture protection
  •  Dual Voltage LED Lantern makes a transition progressive between 240V and 42V.
  • One, two and three aspect lantern housing
  • Target boards with white border
  • Target boards without border
  • 250mm, 300mm and 400mm mounting straps
  • Front Visor and Louvre

TECHNOLOGY

High Intensity LED

OPERATING TEMPERATURE

-15ºC ~ +60ºC

LANTERN ENCLOSURE

IP65

LANTERN CONNECTOR

IP68

NORMAL OPERATING VOLTAGE

42V AC 240V AC

DIMMING VOLTAGE RANGE

19 ~ 42V AC 110 ~ 240V AC

DIMMING LUMINANCE RANGE

0 ~ 100 % 0 ~ 100 %

SAFETY SHUT DOWN VOLTAGE

19V AC 110V AC

POWER FACTOR

>0.97

POWER CONSUMPTION

10 ~15 W

SWITCH-OFF TIME

<120ms

Request a Call back or call us +61 3 9430 0222