Clearsonics Controllercom

Traffic Technologies Ltd > Product Brochures > Emergency > Clearsonics Controllercom

Clearsonics Controllercom


The Clearsonics IP Contollercom (controller/intercom) allows hands free Voice communications over wired IP networks (VoIP). With appropriate software, the Controllercom may also be used as an IP based public address system. Line level monitoring/recording outputs are available for both local and remote audio signals. The local voice signal (mic input) can also be transmitted to a “Recording Server” located on a seperate IP address. Voice calls can be autonomously terminated after programmable ‘no data’ or ‘in call’ periods have been exceeded.

One or two ‘call’ buttons can be provided allowing calls to be established with up to two remote locations; a switchboard and gatehouse for example. The SIP number dialed when a button is pressed (and other operational parameters) may be re-programmed from any computer connected to the same IP network.


  • Model: VoIP-SA 1162
  • Operating temperature: 0ºC to 70ºC
  • Storage temperature: -40ºC to 70ºC
  • Humidity: 5 to 95% non-condensing
  • Power R equirements: 12V – 24V DC 1A


Power Consumption

  • Idle current 65mA
  • Typical current while call in progress 80mA
  • Maximum current while call in progress
  • 150mA



  • Surface 326 x 144 x 105mm
  • Flush 418 x 234 x 65mm

Supported protocols

  • G.711 mu-law + A-Law
  • Session Initiation Protocol (SIP) RFC 3261
  • Real-Time Transport Protocol (RTP) RFC 3550
  • Session Description Protocol (SDP) RFC 2327
  • Trivial File Transfer protocol (TFTP) RFC 1350
  • User Datagram Protocol (UDP) RFC 0768


Physical connections

  • Local area network (LAN) connector


Audio specifications

  • G711 (mu-law + A-Law)
  • Audio in 1.0V
  • Audio out 1.0V
Request a Call back or call us +61 3 9430 0222